How to read a heat pump quotation in Scotland

Last updated: 28 October 2026. Reviewed by the Scottish Energy Efficiency team.

What should a heat pump quotation include?

A heat pump quotation must state the heat pump model, its rated capacity in kW, the SCOP with assumptions, the hot water cylinder, any radiator upgrades, the network operator application, and the guarantee terms. Each line should have a cost. A total price without itemisation tells you nothing about what you are buying.

Heat pump quotations are more complex than solar because they touch your entire heating system. A quote that gives a single number is hiding the decisions that matter: whether your radiators need upgrading, whether your hot water cylinder is included, and whether the heat loss calculation has been done.

We install through MCS-certified partners, and every heat pump quotation we produce itemises the heat pump unit, the hot water cylinder, radiator upgrades if needed, the controller, the network operator application, and the guarantee. This lets you see exactly what you are paying for and compare it against any other quote.

What is SCOP and why does it matter in the quotation?

SCOP (Seasonal Coefficient of Performance) measures how efficiently the heat pump works across a full heating season. A SCOP of 3.5 means 3.5 units of heat for every 1 unit of electricity. The quotation should state the SCOP with the assumptions it was calculated from: flow temperature, design outside temperature, and property heat loss.

SCOP is the single most important number in a heat pump quotation because it determines your running cost. A heat pump with a SCOP of 3.5 uses roughly a third of the electricity of a SCOP of 2.5 for the same heat output. The difference over a winter can be hundreds of pounds.

The SCOP depends on the flow temperature — how hot the water is that circulates through your radiators or underfloor heating. Lower flow temperatures mean higher efficiency. This is why older radiator systems may need upgrading: they were designed for 70-80°C boiler water, but heat pumps work best at 35-50°C.

If the quotation shows a SCOP but does not state the assumptions, the number is not verifiable. Ask for the flow temperature, the design outside temperature (typically -3°C to -5°C for Scotland), and the property heat loss in kW.

Will my radiators need upgrading with a heat pump?

Possibly. Heat pumps work at lower flow temperatures than boilers, so radiators sized for 75°C boiler water may be too small for a 45°C heat pump system. The quotation should include a room-by-room heat loss calculation and state which radiators need upgrading and at what cost.

This is where heat pump quotations often hide costs. A quote that does not mention radiator upgrades may assume your existing radiators are sufficient, but without a room-by-room heat loss calculation, that assumption is not worth anything.

The heat loss calculation takes each room, measures its heat loss based on wall construction, insulation, window area, and room size, and determines whether your existing radiators can deliver enough heat at the lower flow temperature. If they cannot, larger radiators or additional radiators are needed. The quotation should list each room, the heat loss in watts, and the required radiator size.

Is a hot water cylinder included in the quote?

A heat pump needs a hot water cylinder to store domestic hot water. If your existing cylinder is too small or incompatible, a new one is required. The quotation should state the cylinder capacity, whether it is included, and its cost. A cylinder swap can add £800 to £1,500, typical, subject to survey.

Heat pumps heat water more slowly than boilers, so a larger cylinder is usually needed — typically 200-300 litres for a family home. If your existing cylinder is a standard 120-litre unit, it will likely need replacing.

The quotation should specify the cylinder brand, capacity, and whether a pre-heat coil or immersion backup is included. If the cylinder is listed as "existing" without confirming compatibility, ask for written confirmation that it will work with the heat pump at the stated flow temperature.

What guarantee should a heat pump quote include?

The quotation should state the product warranty on the heat pump unit (typically 5-7 years), the warranty on the cylinder, and whether the workmanship guarantee is insurance-backed. Ask whether the guarantee survives if the installer ceases trading and request the insurer name in writing.

Heat pump warranties are typically shorter than solar warranties — 5 to 7 years on the unit, sometimes extendable to 10 years with annual servicing. The quotation should state the warranty length, whether annual servicing is required to maintain it, and the cost of that servicing.

As with solar, the workmanship guarantee should be insurance-backed. This means an insurer covers remedial work if the installer goes out of business. Ask for the insurer name and policy details. For more on this, see our red flags guide.

Does the Boiler Upgrade Scheme apply in Scotland?

No. The Boiler Upgrade Scheme is England and Wales only and does not apply in Scotland. Any quotation that references it as a discount is not accurate for a Scottish installation. Ask your installer what applies in Scotland before relying on any price reduction shown.

This is a common source of confusion. Some companies quote in Scotland using BUS figures, which inflates the apparent discount. A quotation that shows a price reduction attributed to a government scheme should name the scheme and confirm it applies in Scotland.

For more on what to watch for, see our red flags guide or our general FAQ page.

Frequently asked questions

How much does a heat pump cost in Scotland?

A typical air source heat pump installation in Scotland costs £8,000 to £15,000, typical, subject to survey. The range depends on property size, radiator upgrades, hot water cylinder requirements, and system complexity. Ground source systems cost significantly more.

Are heat pumps efficient in cold Scottish winters?

Yes. Modern air source heat pumps work efficiently down to -20°C and beyond. The SCOP accounts for winter performance. A properly sized heat pump in Scotland should achieve a SCOP of 3.0-4.0, meaning 3-4 units of heat per unit of electricity.

How long does a heat pump installation take?

A typical installation takes 3-5 days. It involves removing the old boiler, installing the heat pump outside, fitting the hot water cylinder inside, upgrading radiators if needed, and commissioning. The quotation should state the expected timeline.

Do heat pumps need servicing in Scotland?

Yes. Annual servicing is typically required to maintain the warranty. The quotation should state the servicing requirement and the typical cost, which is usually £150-£250 per year. Some warranties require servicing by an approved engineer.

Get a Quote

Ready for a quotation you can actually read?

Fill in the form and we will build an itemised quote that answers all nine checklist questions. No obligation, no cold call.

Fill in the form and we will build an itemised quotation across solar, battery, EV charging, or heat pumps — one that answers all nine checklist questions. No obligation, no cold call, no pressure.

Interest-free credit up to £30,000, subject to status.

By submitting this form you agree to be contacted by Renewable Quotes Scotland, a trading name of Scot Energy Efficiency Ltd (company number 17408629), about your enquiry.

We install through MCS-certified partners. See our privacy policy.